The WTPN range of 3 phase distribution board ideal for commercial, industrial, and where required domestic installations.
All enclosures are supplied with a 125A 4 pole main switch as standard and Type 2 surge protection device (SPD)
Robust 1.2mm steel enclosure to ensure a long life in the harshest of environments
WTPN boards will accept our 6kA devices
without any modification or additional
hardware.
Our WRB range of 10KA RCBO with A Type RCD protection in one. RCBO’ s provide residual and overload protection in one neat device. They can detect & respond as for type AC, PLUS pulsating DC components. Ideal for Domestic and Commercial applications.
BI-DIRECTIONAL Ideal for Solar Installations
Three phase SPD unit consisting of an 8 way, IP40 metal enclosure with 4 pole 20kA/40kA type 2 surge protector and 4 pole 10kA MCB.
Three phase SPD unit consisting of an 8 way IP40 metal enclosure, with 4 pole 20kA/40kA type 2 surge protector and 4 pole A-type RCBO.
Automatically monitors the supply voltage on both 400 & 415V supplies without the need for any manual dip switch settings. Within 5 seconds in the event of an under-voltage of any phase less than 207V or an over-voltage of any phase more than 253V, live, neutral and earth will be isolated.
Following an under-voltage, isolation will automatically reset when normal operating range is restored.
Following and over-voltage, isolation, on the grounds of safety, will require a manual reset. (press the red button of the WP9 to reset.)
The WMTP28-R40CSP is a 3 phase EV distribution board that will completely disconnect all phases and earth if a PME fault is detected. It provides customers with a safer and compliant electrical vehicle charging solution. There is no need for an earth rod if this distribution board is used. It is suitable for EV (electric vehicle) chargers with integral DC leakage protection but no PME fault detection.
This product must be installed by a qualified electrician in accordance with IET wiring regulations BS7671 (18th edition or later) and current building regulations.
Three phase SPD unit consisting of an 8 way, IP40 metal enclosure with 4 pole 20kA/40kA type 2 surge protector and 4 pole 10kA MCB.
Three phase SPD unit consisting of an 8 way IP40 metal enclosure, with 4 pole 20kA/40kA type 2 surge protector and 4 pole A-type RCBO.
Please fill out the form below to request a quote
Contact us if you have more questions or wish to place an order.