Heat Pump & Solar Consumer Units

follow the green and yellow dot in our catalogue

Green Yellow dots

Heat pump consumer unit

A new addition to the Whitecliffe range of renewable energy boards.

Metal enclosure containing a Main Switch, surge protection, 2 pole MCB and a B type RCD to protect against DC earth leakage. 

Custom Build Variants are available to your configuration of MCB’s or RCBO’s

Part code:DescriptionDimensions (WxHxDmm)
WME08/HP40CMetal 8 module enclosure with surge protection, 40A RCD and 16A C-curve MCB’s232x240x112
WME08/HPR40CMetal 8 module enclosure with surge protection, 40A RCD and 16A C-curve MCB and two 16A RCBO's232x240x112

PV DC Rotary Isolators

Manufactured from tough and durable thermoplastic, it is built to withstand even the harshest
weather conditions, providing maximum reliability and longevity. Specifically designed for solar applications, this switch offers
unparalleled performance and reliability.

The WRS32DC-GL has switch disconnectors that isolate the lines between solar module and inverter, allowing firefighters to operate without risk of electrocution.

Part code:DescriptionDimensions (WxHxDmm)
WRS32DC-GL2 String DC Rotary Isolator129.5x215x123
WRS4P45DCDC rotary isolator129.5x215x123

Type B HP
2 mod RCD

The WHP B Type RCD is designed to detect and trip under smooth DC faults at any level. Tested to operate at frequencies above 20 kHz, with a minimum tripping threshold of 150 mA for frequencies over 1 kHz.

Type B HP RCDs: Technical Overview

• Two-pole two-module: Space-saving design enables easier installation using standard busbar.
• Compliance with BS 7671 Standards: These devices meet the requirements set out in BS 7671, ensuring they provide the necessary protection in modern electrical installations.
• Effective Operation at High Frequencies: Designed to function reliably at frequencies of 20 kHz and above, making them suitable for applications involving variable-speed drives and heat pump systems.
• Detection of Smooth DC Fault Currents: Capable of detecting and interrupting continuous smooth DC residual currents, which is essential for comprehensive fault protection in systems where such currents may be present.

Type ‘B’ devices are also suitable for type ‘AC’, type ‘A’ and type ‘F’ applications

Part code:DescriptionDimensions (WxHxDmm)
WHP240-0302 pole 40A B HP Type RCD36x82x70

Solar Consumer Units

Whitecliffe Solar PV Consumer Units provide a compact, factory-assembled solution for domestic solar installations, combining all essential switchgear into one compliant enclosure. By integrating isolators, protection devices, and metering, they significantly reduce on-site wiring, labour, and space requirements. Available with 25A, 32A, or 40A rotary isolators, these units offer installers a reliable, time-saving, one-stop solution ideal for domestic, housing, and local authority solar PV projects.

Part codeDescriptionDimensions (WxHxDmm)
WME10/SOL1c/w 20a RCBO, 32A rotary isolator and kwH meter.232x240x112

Custom builds can be ordered to your specification. Contact the Whitecliffe technical team for more information

DC String Combiner Consumer Units

Whitecliffe PV String Combiner Boxes are suitable for both small rooftop installations and large ground-mounted solar systems. They provide surge protection for the photovoltaic system, combine multiple PV strings where required, and allow the protective equipotential bonding conductor to be looped through for effective local earthing and system safety.

 

Part CodeDescriptionDimensions (WxHxDmm)
WMPV-1S1IP65 1 String 1 output metal combiner box 1000Vdc c/w type 2 surge protection device & DC rotary isolator300x260x142
WPPV-1S1IP65 1 String 1 output plastic combiner box 1000Vdc c/w type 2 surge protection device & DC rotary isolator280x240x126
WPPV-2S2IP65 2 String 2 output plastic combiner box 1000Vdc c/w type 2 surge protection device & DC rotary isolator442x240x126

Get a Quote

Please fill out the form below to request a quote

Need more help?

Contact us if you have more questions or wish to place an order.